2.0 0.15 4.7 0.25 3.6 0.3 2.3 0.15 1.3 0.2 0.203max 0.2 0.05 5.4 0.2 low cost low leakage low forward voltage drop high current capability case:jedec do-214aa,molded plastic polarity: color band denotes cathode weight: 0.003 ounces, 0.093 gram mounting position: any ratings at 25 ambient temperature unless otherwise specified. single phase,half wave,60 hz,resistive or inductive load. for capacitive load,derate by 20%. es3cb es3db es3gb ec ed eg maximum recurrent peak reverse voltage v rrm 150 200 400 v maximum rms voltage v rms 105 140 280 v maximum dc blocking voltage v dc 150 200 400 v maximum average forward rectified current @t a =100 peak forward surge current 8.3ms single half-sine-wave superimposed on rated load @t j =125 maximum instantaneous forward voltage at3.0 a v f v maximum reverse current @t a =25 at rated dc blocking voltage @t a =125 typical reverse recovery time (note1) t rr ns typical junction capacitance (note2) c j pf typic al therm al resistance r ja /w operating junction temperature range t j storage temperature range t stg 0.95 1.25 do-214aa(smb) device marking code ea eb units - 55 ---- + 150 ES3AB es3bb 50 100 a 100 i fsm i r note: 1. measured with i f =0.5a, i r =1a, i rr =0.25a. a a 10 easily cleaned with alcohol,isopropanol and similar solvents i f(av) 3.0 the plastic material carries u/l recognition 94v-0 100 50 70 2. measured at 1.0mhz and applied reverse voltage of 4.0v dc. 45 35 40 500 voltage range: 50 --- 400 v current: 3.0 a - 55 ---- + 150 35 maximum ratings and electrical characteristics 3. thermal resistance f rom junction to ambient and junction to lead p.c.b.mounted on 0.27''x0.27''(7.0x7.0mm2) copper pad areas dimensions in millimeters ES3AB-es3gb surface mount rectifiers features mechanical data http://www.luguang.cn mail:lge@luguang.cn
t j =25 1 2 4 6 10 20 40 60 100 200 0.1 0.2 0.4 1 2 4 10 40 100 20 amperes amperes amperes junction capacitance,pf notes:1.rise time = 7ns max.input impedance = 1m .22pf. jjjjj 2.rise time =10ns max.source impedance=50 . instantaneous forward voltage, volts instantaneous forward curren t fig.1 -- test circuit diagram and reverse recovery time characteristic average forward current set time base for 20/30 ns/cm fig.2 -- typical forward characteristic fig.3 -- forward derating curve z fig.4 -- typical junction capacitance fig.5 -- peak forward surge current ambient temperature, peak forward surge curren t number of cycles at 60hz reverse voltage,volts pulse generator (note2) d.u.t. 1 nonin- ductive 50 n 1. 10 n1. oscilloscope (note 1) (+) 25vdc (approx) (-) -1.0a -0.25a 0 +0.5a t rr 1cm 0.1 0.8 0.01 0.4 0 pulse width=300 s 1% duty cycle 1.0 1.8 1.0 10 100 t j =25 3.0 0 80 100 110100 60 5 8.3ms single half sine-wave 50 20 40 1.5 3 0 25 50 75 100 125 150 single phase half wave 60h z resistive or inductive load 0 175 ES3AB-es3gb surface mount rectifiers ratings and charactieristic curves http://www.luguang.cn mail:lge@luguang.cn
|
